Filter
Top Products
MMB CLI (Command Line Interface) Operations
2.2.17 set hostname
Specifies the host name of MMB in FQDN format
Characters which can be entered, are as follows.
[a-z],[A-Z],[0-9],[-] (Hyphen),[.] (Dot)
However, following conditions must be observed
The first character must be alphanumeric character.
[-] (Hyphen),[.] (Dot) cannot be used as first character
Default value is “PRIMEQUEST” + Product Serial Number.
Example:
When serial number is 1020516004,
“PRIMEQUEST1020516004”
Privilege: Administrator
(1) Input format
set hostname <hostname>.<domain name>
(2) Option
None
(3) Usage example
# set hostname hogehoge.fujitsu.com
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified hostname is invalid.
Unable to execute this command on a standby MMB.
2.2.18 set http
Enable/disable of HTTP server is set
Default value is disable (http is invalid)
Privilege: Administrator
(1) Input format
set http [enable|disable]
(2) Option
None
(3) Usage example
None