Filter
Top Products
MMB CLI (Command Line Interface) Operations
2.6 PRIMEQUEST2800B model Commands
2.6.1 PRIMEQUEST2800B model CLI command list
This chapter describes the functions of the PRIMEQUEST2800B model CLI commands. Follow Chapter 2.5
from Chapter 2.2 about the part not described in this chapter.
The following tables list the account privileges required for individual commands.
"Permitted" in an account privilege column indicates the command can be used with those account privileges.
- TABLE 2.9 MMB CLI commands (Administrator)
- TABLE 2.10 MMB CLI commands (Operator)
- TABLE 2.11 MMB CLI commands (User)
- TABLE 2.12 MMB CLI commands (CE)
TABLE 2.9 MMB CLI commands (Administrator)
Command
Administrator
Outline
Power control
power off
Permitted
Turns the power off.
power on
Permitted
Turns the power on.
Partition creation
add partition
-
Adds a partition component.
remove partition
-
Removes a partition component.
show partition configuration
-
Displays the partition configuration.
set reserved_sb
-
Sets the Reserved SB.
show reserved_sb
-
Displays the Reserved SB.
set partition home
-
Sets the Home SB.
show partition home
-
Displays the Home SB.
set partition dynamic_partitioning
-
Sets DR state of partition.
show partition dynamic_partitioning
-
Displays DR state of partition.
set memory_operation_mode
Permitted
Sets Memory operation mode.
show memory_operation_mode
Permitted
Displays Memory operation mode.
set memory_mirror_ras_mode
Permitted
Sets Memory operation at mirror mode.
show memory_mirror_ras_mode
Permitted
Displays Memory operation at mirror mode.
set pci_address_mode
-
Sets PCI bus number allocation mod.
show pci_address_mode
-
Displays PCI bus number allocation mod.
set lan_device_mode
Permitted
Sets LAN device mode.
show lan_device_mode
Permitted
Displays LAN device mode.
set pci_express_mode
-
Sets PCI-express mode.
show pci_express_mode
-
Displays PCI-express mode.
set partition name
-
Sets the partition name.
show partition name
-
Displays the partition name.
hotadd partition
-
Dynamic Partiiton HotAdd
hotremove partition
-
Dynamic Reconfiguration HotRemove
Partition control
sadump
-
sadump instruction
reset
Permitted
Hard Reset instruction
nmi
Permitted
NMI interrupt instruction
Partition connection