Filter
Top Products
MMB CLI (Command Line Interface) Operations
The specified IP address is invalid.
The specified netmask is invalid.
The specified IP address is duplicated.
The specified IP address is loopback address.
Unable to execute this command on standby MMB.
2.2.23 set ipv6
Sets the global address for IPv6 and prefix length for management LAN interface.
Sets virtual IP address of MMB.
When automatic setting is done, only “auto” is specified in the option.
Privilege: Administrator
(1) Input format
In case of manual setting
set ipv6 <ip address/prefix>
In case of automatic setting
set ipv6 auto
(2) Option
auto: IP address is set automatically.
(3) Usage example
In case of manual setting
#set ipv6 2001:db8:caaf:beef:206:29ff:fele:482e/48
#
In case of automatic setting
If GUID (Device serial number): “123456789abcdef0”
#set ipv6 auto
2001:xxxx:xxxx:xxxx:xxxx:1234.5678.9abc.def0/64
Are you sure to continue? [Y/N]
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Unable to execute this command on a standby MMB.
The specified IP address is invalid.
The specified netmask is invalid.
The specified IP address is duplicate.
The specified IP address is loopback address.
2.2.24 set maintenance_ip
Remarks
Only IPv4 is supported.
Set IP address in Maintenance port.