Filter
Top Products
Setting of sadump environment
TABLE 6.6 Displayed contents of the help display area for operation
Item
Description
↑↓=Move Highlight
Moves the cursor up or down
<Enter>=Select Entry
Selects an entry.
Note
Don’t operate [F2] key. [Esc] key is displayed on the screen but don’t operate it.
6.5 [Create a dump device] Menu
This is displayed when the [Create a dump device] menu is selected in the main menu.
Specify operation, creating dump device or selecting created dump device.
FIGURE 6.8 Dump device create menu
TABLE 6.7 Displayed contents of menu selection area
Item
Description
Create mode
Select create mode of dump device.
Single： Create with single disk or single partition. To
set up for redundancy, select [Single] and then
configure multiple sadump devices.
Multiple: Create with multiple disks. Use this when
system memory is large and one disk is insufficient.
The default is [Single].
Disk selection
Go to dump device select menu
Exit
Exits this menu.