Filter
Top Products
MMB CLI (Command Line Interface) Operations
pci_express_mode | lan_device_mode] <partition#>
netck [arptbl | ifconfig | stat | traceroute <ip> | arping <ip>]
console <partition#> {<timeout>} {quiet}
update ALL <url> {force} {quiet}
nmi {partition} [ <partition#> [, | -] <partition#>] {quiet}
reset {partition} [ <partition#> [, | -] <partition#>] {quiet}
sadump {partition} [ <partition#> [, | -] <partition#>] {quiet}
exit
passwd {USER}
ping {-c <count>} [<ip address> | <server name>]
who
help
#
Example 2: For CE privilege
#help
factory_default {-f} set active_mmb {0 | 1} {quiet}
set maintenance_ip <ip address> <netmask> <gateway address> <smtp address>
set sysconf power_feed_mode [single | dual] {quiet}
set sysconf power_restoration_policy [on | off | restore | sync] {quiet}
set sysconf power_on_delay <time> {quiet}
set sysconf altitude <altitude>
set sysconf psu_redundant_mode [redundant | non_redundant] {quiet} show [active_mmb | date |
timezone | gateway | gateway_ipv6 | http | http_port |
https | https_port | ssh | ssh_port | telnet | telnet_port | ip | ipv6 |
hostname | network | maintenance_ip | ntpq |
update_status | firmware_version | exit_code |
sysconf power_feed_mode | sysconf power_restoration_policy |
sysconf power_on_delay | sysconf altitude | sysconf psu_redundant_mode |
sysconf input_voltage] show partition configuration [ all | free | <partition#>{[, | -] <partition#>}]
show partition [home | name | dynamic_partitioning | memory_operation_mode |
memory_mirror_ras_mode | pci_address_mode |
pci_express_mode | lan_device_mode] <partition#>
netck [arptbl | ifconfig | stat | traceroute <ip> | arping <ip>]
update ALL <url> {force} {quiet} exit
passwd {USER}
ping {-c <count>} [<ip address> | <server name>]
who
help
#
Example 3: For Operator privilege
#help
power off {partition} [ all | <partition#>[,| -]<partition#>] {force}
power on {partition} [ all | <partition#>[,|-]<partition#>] set partition dynamic_partitioning <partition#>
[disable | enable] {quiet}
set partition memory_operation_mode <partition#> [performance | normal | partial_mirror | spare]
{quiet}
set partition memory_mirror_ras_mode <partition#> [mirror_keep | capacity_keep] {quiet}
set partition pci_address_mode <partition#> [bus | segment] {quiet}
set partition pci_express_mode <partition#> [flexible | fixed]
set partition lan_device_mode <partition#> <IOU#> [wol_enable | wol_disable | device_disable] {quiet}
timezone | gateway | gateway_ipv6 | http | http_port |
https | https_port | ssh | ssh_port | telnet | telnet_port | ip | ipv6 |
hostname | network | maintenance_ip | ntpq |
sysconf power_feed_mode | sysconf power_restoration_policy |
sysconf power_on_delay | sysconf altitude | sysconf psu_redundant_mode |
sysconf input_voltage | reserved_sb | exit_code] show partition configuration [ all | free |
<partition#> {[, | -] <partition#>}]
show partition [home | name | dynamic_partitioning | memory_operation_mode |
memory_mirror_ras_mode | pci_address_mode |
pci_express_mode | lan_device_mode] <partition#>
show xpar partition configuration [all | free | <partition#> {[, | -] <partition#>}]
netck [arptbl | ifconfig | stat | traceroute <ip> | arping <ip>] nmi {partition} [ <partition#> [, | -]
<partition#>] {quiet}