Filter
Top Products
UEFI Menu Operations
3.4.9.2 [Attempt Configuration] Menu
As for the Attempt xxxx which is selected from “3.4.9 [iSCSI Configuration] menu” or the network port MAC
xx:xx:xx:xx:xx:xx which is selected from “3.4.9.1 [MAC Selection] Menu”, various settings related to iSCSI
Boot can be done in [Attempt Configuration] menu.
The settings which were changed in this menu are enabled after system reset.
The example of window displayed immediately after starting the [Attempt Configuration] menu is shown below.
FIGURE 3.25 Display example of [Attempt Configuration] Menu
(1) Page information display
It is displayed as [Attempt Configuration].
(2) Menu selection
Menu shown in “TABLE 3.33 Display contents of menu selection” is displayed.
TABLE 3.33 Display contents of menu selection
Item
Display contents
iSCSI Attempt Name Sets the name of iSCSI setting.
Types of characters that can be entered are given below.
0-9,A-Z,a-z,!”#$%&’()*+,-./:;<=>?@[ ¥]ˆ_’{|}
iSCSI Mode Enables/disables the iSCSI boot setting.
・Enabled for MPIO
・Enabled
・Disabled
By default, it is Disabled.
Internet Protocol Selects Internet Protocol.
・IP4
・IP6
・Autoconfigure
By default, it is IP4.
Remarks
When it is set to “Autoconfigure”, iSCSI boots with IPv4 and when it is
failed, it is attempted to boot iSCSI with IPv6.