Filter
Top Products
MMB Web-UI (Web User Interface) Operations
1.7.13 [Mode] Window
Various modes can be set for system in [Mode] window. In order to reflect the set value, turn Off the power
of system and then it is necessary to turn On the Power of system once again.
FIGURE 1.112 [Mode] Window
When the [Apply] button is clicked while the system is powered on, a warning dialog box “W_00487 Unable
to change the mode, because this system is powered on” is displayed.
When the system is already powered off, the settings are reflected without displaying the dialog box.
The LAN Device Mode is displayed in IOU Unit comprised in the partition specified by the LAN Device Mode.
For settings, select LAN Device Mode in the IOU Unit, with the radio button and click the [Apply] button.
TABLE 1.158 Display Items and Setting Items in [Mode] Window
Items
Description
Memory Operation Mode
(Current)
Displays the currently enabled Memory Operation Mode.
Performance Mode: Displays the settings to the Performance Mode.
Normal Mode: Displays the settings to the Normal Mode.
Partial Mirror Mode: Displays the settings to the Partial Mirror Mode.
Full Mirror Mode: Displays the settings to the Full Mirror Mode.
Spare Mode: Displays the settings to the Spare Mode.
Memory Operation Mode
(setting)
Sets the Memory Operation Mode for system.
Performance Mode
Normal Mode
Partial Mirror Mode
Full Mirror Mode
Spare Mode
Enables the settings after rebooting the system.