Filter
Top Products
MMB Web-UI (Web User Interface) Operations
FIGURE 1.48 [Remove SB/IOU from Partition] Window
When maintenance mode (Hot Partition Maintenance, Warm System Maintenance, or Cold System
Maintenance) is set, only the user (Maintenance person, Administrator privilege) who sets the maintenance
mode can operate this mode.
If the partition is selected other than the maintenance target, message is displayed and operation is not
possible.
TABLE 1.71 Display Items and Set Items of [Remove SB/IOU to partition] Window
Items
Description
SB
Displays SB which belongs to partition
Status
Displays the status of SB.
Number of CPUs
Displays the number of CPUs mounted on the SB.
Memory
Displays the amount of memory mounted on the SB.
IOU
Displays the IOU which belongs to the partition.
Status
Displays the status of the IOU
Number of PCI-Express slots
Displays the number of PCI-Express of the IOU.
“DR”
When Remove is instructed for a Partition where the operating system is already running, and if operating
system supports Hot-remove, the SB/IOU is removed from the concerned partition though the operation
system is running state. Then SB/IOU is in Free status.
(1) Menu Operation
[Partition] - [Partition Configuration] - [Remove Unit] button
(2) Window Operations
1. Select the SB or IOU which is to be removed from the partition and click the [Apply] button.
Confirmation dialog box is displayed.
2. Click [OK] button.
SB or IOU is removed.
3. Click the [Apply] or [Cancel] button.