Filter
Top Products
MMB Web-UI (Web User Interface) Operations
Items
Description
Memory Mirror RAS
Mode
(current status)
Displays the Memory operation of currently enabled Mirror Mode.
Mirror Keep Mode: Shows the maintenance of Mirror Mode.
Capacity Keep Mode: Shows maintenance of memory capacity.
Memory Mirror RAS
Mode
(setting)
Sets the Memory Operations for Mirror Mode for partition.
Mirror Keep Mode
Capacity Keep Mode
Enables the settings after rebooting the partition.
As these items are enabled only when the Mirror mode is set, when Mirror
Mode is not set, they are disabled.
Default setting is Mirror Keep Mode.
PCI Address Mode
(current status)
Shows the currently set PCI Bus number allocation Mode.
PCI Bus Mode
PCI Segment Mode
The setting of PCI Address Mode is decided depending on the following
conditions.
When the Dynamic Reconfiguration
function is made effective, it is
necessary to set it to Segment Mode.
When OS does not correspond to Segment Mode, it is necessary to set
PCI Address Mode to Bus Mode.
When the TXT function is used, it is necessary to set PCI Address Mode
it to Bus Mode.
It is recommended to set PCI Address Mode to Segment Mode though it is
possible to set in both Bus Mode and Segment Mode when OS corresponds to
Segment Mode.
Please refer to "Appendix of General Description (C122-B025-01EN
)" for
whether OS corresponds to Segment Mode.
PCI Address Mode
(setting)
Sets the PCI Bus number allocation Mode for partition.
PCI Bus Mode
PCI Segment Mode
Enables the settings after rebooting the partition.
Default setting is PCI Segment Mode.
Dynamic Partitioning
(current status)
Displays whether Dynamic Reconfiguration Function is enabled or disabled.
Enable
Disable
Dynamic Partitioning
(setting)
Sets whether the Dynamic Reconfiguration Function is enabled or not.
Enable: Enables the Dynamic Reconfiguration Function.
Disable: Disables the Dynamic Reconfiguration Function.
Enables the settings after rebooting the partition.
Settings can be done in the following conditions.
When it is on at Flexible I/O mode..
When the TXT/TPM function is disabled.
Default setting is Disable.
TPM
(chip status)
Displays whether TPM function is Enabled or Disabled.
Enabled (TPM is enabled)
Disabled (TPM is disabled)
Remarks
When Home SB of partition is ‘without TPM mode’, this field is not displayed.
TPM
(current status)
Displays the TPM status.