Filter
Top Products
MMB CLI (Command Line Interface) Operations
(1) Input format
show partition configuration [all | free | <partition#> {[, | -] ¥
<partition#>}]
¥: Indicates that there is no line feed.
(2) Option
all: Displays SB/IOU which does not belong to all partitions and to any partition.
free: Displays SB/IOU which does not belong to any partition.
<partition#>: Displays the specified partition.
The specification method when multiple partitions are specified is as follows.
The partition number is delimited by a comma and is specified.
Partition number is specified within the range
Remarks
Specifications of comma-delimited and number range of can be mixed.
(3) Usage example
Example: When configuration information of partition of partition number 0~2 with PRIMEQUEST
2800E is displayed
# show partition configuration 0-2
0 hogehoge SB#0 SB#0 RSB#3 IOU#0
1 testserver SB#1 SB#1 IOU#0
2 SB#2 SB#2 IOU#1
#
Example: When all the specifications for the configuration which are the same as the above-mentioned
are used
# show partition configuration all
0 hogehoge SB#0 SB#0 RSB#3 IOU#0
1 testserver SB#1 SB#1 IOU#1
2 SB#2 SB#2 IOU#2
3 <Since nothing is registered, it is displayed as blank>
free IOU#3
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute show partition configuration command.
2.3.6 show partition dynamic_partitioning
Displays the status of Dynamic Reconfiguration of the specified partition..
Privilege: A
ｌｌ