Fujitsu C122-E177-01EN Computer Hardware User Manual


 
MMB CLI (Command Line Interface) Operations
(1) Input format
show partition dynamic_partitioning <partition#>
(2) Option
None
(3) Usage example
Example: When the status of Dynamic Reconfiguration of Partition#3 is displayed
# show partition dynamic_partitioning 3
current: disabled
setting: enabled
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute show partition dynamic_partitioning command.
DP can't be enabled, because of no DP license
2.3.7 show partition home
Displays Home SB of the specified partition.
Privilege: A
ll
(1) Input format
show partition home <partition#>
(2) Option
None
(3) Usage example
When Home SB of partition 3 is displayed
#show partition home 3
SB#2
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Home SB is not set in Partition#x.
Failed to execute show partition home command.
Partition#x is not defined.