Filter
Top Products
Setting of sadump environment
TABLE 6.9 Displayed contents of menu selection area
Item
Description
Exit
Exits this menu
ACPI name of disk/disk
partition
Select disk or disk partition to create dump device
Remarks
-Regarding to ACPI name which is used for disk or disk partition, refer”5.7 Device Path”.
-To use devices of ETERNUS as dump device, setting up UEFI deriver is needed beforehand. Refer
“PRIMEQUEST 1000/2000 Series SAN Boot Environment Configuration Manual (C122-E155EN)” for details.
TABLE 6.10 Displayed contents of the help display area for operation
Item
Description
↑↓=Move Highlight
Moves the cursor up or down
<Enter>= Select Entry
Create dump device with selected disk or disk
partition, and go to dump device create menu.
If [Exit] is selected, go to dump device create menu
without creating dump device.
Note
[Esc] key is displayed on the screen but don’t operate it.
- A dump device is initialized when it is created. It takes a time to initialize, depends on the size of selected
disk or disk partition. In some cases it takes more than several minutes until going to the next screen.