Filter
Top Products
MMB CLI (Command Line Interface) Operations
2.3.32 netck traceroute
The network route from the specified IP address to the target host is displayed in the list.
Remarks
Support only IPv4.
Privilege: A
ｌｌ
(1) Input format
netck traceroute <ip>
(2) Option
None
(3) Usage example
# netck traceroute 10.2.3.4
traceroute to 10.2.3.4 (10.2.3.4), 30 hops max, 40 byte packets
1 10.2.4.1 (10.2.4.1) 0.822 ms 5.142 ms 0.59 ms
2 10.2.5.1 (10.2.5.1) 0.923 ms 0.747 ms 0.679 ms
3 10.2.6.1 (10.2.6.1) 0.955 ms 0.736 ms 0.71 ms
4 10.3.2.1 (10.3.2.1) 1.023 ms 0.861 ms 0.837 ms
5 10.3.2.2 (10.3.2.2) 1.049 ms 0.939 ms 0.887 ms
6 10.2.3.5 (10.2.3.5) 1.285 ms 1.005 ms 0.997 ms
7 10.2.3.4 (10.2.3.4) 0.976 ms 0.828 ms 0.891 ms
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
(5) Process
Executes “traceroute<ip>”
2.3.33 netck arptbl
Displays the physical address (MAC address) of the Ethernet from the specified IP address.
Privilege: A
ｌｌ
(1) Input format
netck arptbl
(2) Option
None
(3) Usage example
# netck arptbl
IP address HW type Flags HW address Mask Device