Filter
Top Products
MMB Web-UI (Web User Interface) Operations
FIGURE 1.110 [ASR (Automatic Server Restart) Control] Window
TABLE 1.155 Display Items and Set Items of [ASR (Automatic Server Restart) Control] Window
Items
Description
Number of Restart Tries
Set the number of retries for restarting the operating system when there is time
out by Boot Watchdog, or Software Watchdog of SVAS, or the hardware error
occurs and OS shuts down.
The number of times can be set up to 0-10 times. When 0 is specified, it does not
retry.
Default is five times.
Action after exceeding
Restart tries
Repeat the restart by Watchdog Timeout and sets the action when the above-
mentioned retry number is exceeded. The actions are as below.
Stop rebooting and Power Off: Reboot process is stopped, power supply of
partition is cut off.
Stop rebooting: Reboot process is stopped, and the system is stopped.
Diagnostic Interrupt assert: Reboot process is stopped, instructs the NMI
interruption for system
. Tries to collect the data for investigation (damp) for
the investigating the cause of stoppage, of the system which has stopped.
Default setting is ‘Stop rebooting and Power Off’
Retry Counter
Displays the number of actual possible retries.
Cancel Boot
Watchdog
Cancels operating system boot monitoring.
The operating system Boot monitoring is a function of
ServerView, and the Boot
Watchdog Timeout time is set and the monitoring is started on the screen of
ServerView.
However, if the timeout time of Boot Watchdog is mistaken and short time is set
on the ServerView window, there is timeout before the start of the ServerView that
stops the timer. There is a possibility that the problem such as repeating the
reboot might occur.
If this problem occurs, since the ServerView does not start, Boot Watchdog cannot