Filter
Top Products
MMB CLI (Command Line Interface) Operations
(1) Input format
set telnet [enable | disable]
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Unable to execute this command on a standby MMB.
2.2.34 set telnet_port
Sets the port which receives the telnet connection. Default setting is 23.
Port numbers which can be set are 23, 1024~65535.
Privilege: Administrator
(1) Input format
set telnet_port <port>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.35 set timezone
Set the Timezone.
Remarks
It is necessary to reset the time by using set date command after the time zone is set.
Privilege: Administrator
(1) Input format