Fujitsu C122-E177-01EN Computer Hardware User Manual


 
MMB Web-UI (Web User Interface) Operations
This section describes the messages to be displayed on this window.
Message Number
Message
E_00089
Mirror Mode setting failed.
E_00090
Power Control [Reset] setting failed.
E_00xxx
Unable to register the system as Mode enable because the DIMM does not satisfy
requirements of Mode.
W_00xxx
Unable to change the mode, because the system is powered on.
E_00xxx
Unable to register the system as Mode enable because the CPU mismatch between
SBs.
E_00xxx
Unable to register the system as Mode enable because the unsupported CPU
configuration.
E_00xxx
Unable to register the system as Mode enable because of abnormal CPU
composition.
E_00xxx
Unable to register the system as Mode enable because of abnormal DIMM
composition.
E_00xxx
Unable to register the system as Mode enable because of abnormal SB composition.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
1.7.14 [SB] Menu
[SB] Menu consists of the menus in each SB unit.
The menu of uninstalled SB is not displayed.
The format of window and operating method are same for each menu, therefore only one menu is explained
here.
[SB#x] Window
[SB#x] window displays the status of SB#x board and the settings of SB#x board can be carried out.
FIGURE 1.113 [SB#x] Window (1)