Filter
Top Products
UEFI Menu Operations
FIGURE 3.53 Display Example of [Set Legacy HardDisk Drive Order] Menu
(1) Page Information Display
Displays as [Set Legacy HardDisk Drive Order]
(2) Menu Selection
Displays the items shown in the “TABLE 3.60 Display Contents of Menu Selection”
TABLE 3.60 Display Contents of Menu Selection
Item
Explanation
HardDisk Drive #N
(N: 0, 1 …)
Following is displayed.
HDD information
confirmed at the time of initialization after the
power-on
Disable: Displayed when Disable is selected.
Device for which the configuration is changed after initialization is
not displayed. Hence the system should be reset after the device
configuration ch
anges. Further, the configuration change of the
device indicates the case where the following operations are
executed.
Swapping of USB devices
Activation of configuration display and update menu of Fibre
channel and SAS RAID
The change method is explained next in “ Change of the Priority
Level (Set Legacy HardDisk Drive Order)”.
Commit Changes and Exit
Exit from this menu after saving the changes.
Discard Changes and Exit
Exit from this menu after cancelling the changes.
(1) Operation Help Display
Displays the explanation of the operation key shown in “TABLE 3.61 Display Contents of the Operation Help
Display”