Filter
Top Products
MMB CLI (Command Line Interface) Operations
2.6.8 set lan_device_mode
LAN Device Mode is set by the IOU unit in the system.
Default value set is wol_disable.
wol_enable : Onboard LAN enabled with AC On.
wol_disable : Onboard LAN enabled with Partition On.
device_disable : Onboard LAN device disabled always.
For the system which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
“Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.”
For the system which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.
Moreover, also when values which are the same as the current values are set, power off/on is not required
and the above-mentioned message is not displayed.
Privilege: Administrator, Operator
(1) Input format
set lan_device_mode <IOU#> [wol_enable| wol_disable | device_disable ]
{quiet}
(2) Option
quiet: Message is not displayed.
(3) Usage example
Example: When setting IOU#2 to Enable (WOL enabled) in the system.
# set lan_device_mode 2 wol_enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The setting will become effective the next time the system power off/on is performed.
The specified parameter is invalid.
Failed to execute %s command.
Failed to execute set lan_device_mode command.
Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.
Unable to execute this command because you have not authority to operate this system.
System Configuration Failed.
2.6.9 show memory_operation_mode
Displays the Memory Operation Mode of the system.
performance: Shows the Performance Mode
normal: Shows the Normal Mode
partial_mirror: Shows the Partial Mirror Mode
full_mirror: Shows the Full Mirror Mode