Filter
Top Products
MMB Web-UI (Web User Interface) Operations
TABLE 1.100 Setting and display items in the [Refresh Rate] window
Items
Description
Refresh Rate
Sets whether to automatically refresh the Web-
UI windows that display dynamic
content. With [Enable]
specified, you can set the time interval of the automatic
refresh in units of seconds.
The specifiable time interval for [Refresh Rate] is in a range of 5 to 999 seconds.
The default is Disable for automatic refresh.
TABLE 1.101 Buttons in the [Refresh Rate] window
Buttons
Description
Apply
Sets the specified information on refresh.
Cancel
Restores the original information and does not set the specified refresh information.
(1) Menu Operation
[Network Configuration] - [Refresh Rate]
(2) Window Operations
1. Specify [Enable] or [Disable] in [Refresh Rate].
If you select [Enable], enter the time interval.
2. Click the [Apply] button.
This sets the information for automatic refresh.
[Message]
The following table lists the messages displayed in this window.
Message Number
Message
I_00013
Setting completed.
W_00441
Range over error.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
1.5.6 [SNMP Configuration] window
The [SNMP Configuration] menu has the following windows:
[SNMP Community] window
[SNMP Trap] window
[SNMP v3 Configuration] window
[SNMP Community] window
You can configure SNMP in the [SNMP Community] window.
You can specify up to 16 items for [Community/User] from the MMB.