Filter
Top Products
MMB Web-UI (Web User Interface) Operations
Items
Description
·
Old event first
The default setting is New event first.
Start Date/ Time
Specifies either display from recent event or specify the time, by using the
radio button.
· First event: Display by recent event
· Specified Time: Specify the time. In case of Specified Time, enter the
Start Date and Time.
The default setting is First event.
End Date/ Time
Specifies either display till last event or specify the time, by using the radio
button.
· Last event: Display till Last event
· Specified Time: Specify the time. In case of Specified Time, enter the
End Date and Time.
The default setting is Last event.
Number of events to display
Specifies the number of log to be displayed. As for the denominator, display
the total number of events that are logged.
A maximum of 3000 events can be specified.
The default setting is 100 events.
TABLE 1.135 [System Events Log Filtering Condition] Window Buttons
Buttons
Description
Apply
Log which matches with the specified conditions will be listed on [System Event Log]
window by clicking the [Apply] button.
Cancel
Returns to [System Event Log] window by clicking the [Cancel] button.
Default Setting
Selected value returns to the default value.
[Message]
This section describes the messages to be displayed on this window.
Message Number
Message
W_00413
Nothing is selected.
W_00414
Invalid Date Format.
W_00426
Invalid Values Specified.
W_00434
Invalid Time Format.
W_00441
Range over error.
I_00417
Are you sure?
I_00468
Are you sure you want to clear the SEL?
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
1.7.3 [Operation Log] Window
As for the display, the operation is the same as the PRIMEQUEST 2400E/2800E model. Refer to chapter
1.2.3.
1.7.4 [System Information] Window
[System Information] window displays the information, such as name of the systems and name of the
products etc., related to the PRIMEQUEST 2800B model.
Moreover, names and Asset Tag (Property management number) corresponding to the PRIMEQUEST
2800B model(Chassis) can be set.