Filter
Top Products
MMB CLI (Command Line Interface) Operations
Command
Operator
Outline
MMB configuration and other
set active_mmb
Sets the active MMB.
show active_mmb
Permitted
Displays the active MMB.
exit
Permitted
Logs out from the MMB.
help
Permitted
Help information
Command termination code display
show exit_code
Permitted
Displays the termination code for the last command
executed.
Firmware revision status/version check
show update_status
Displays the batch firmware update progress.
Network survey commands
netck traceroute
Permitted
Displays a list of network routes.
netck arptbl
Permitted
Displays the physical Ethernet address.
netck arping
Permitted
Displays the physical Ethernet address.
netck ifconfig
Permitted
Displays the network environment setup status.
netck stat
Permitted
Displays a list of port numbers being used.
REMCS-related commands
set maintenance_ip
Sets the REMCS network.
show maintenance_ip
Permitted
Displays the REMCS network setting.
Thotadd partition
Dynamic Partiiton HotAdd.
hotremove partition
Dynamic Reconfiguration HotRemove.
set partition dynamic_partitioning
Permitted
Sets DR state of partition.
show partition dynamic_partitioning
Permitted
Displays DR state of partition.
TABLE 2.4 MMB CLI commands (Partition Operator)
Command
Partition
Operator (*)
(Same
partition)
Partition
Operator (*)
(Other
partition)
Outline
Power control
power off
Permitted
Turns the power off.
power on
Permitted
Turns the power on.
Partition control
sadump
Permitted
sadump instruction
reset
Permitted
Hard Reset instruction
nmi
Permitted
NMI interrupt instruction
Partition connection
console
Permitted
Text Console connection to partition
Partition creation
add partition
Adds a partition component.
remove partition
Removes a partition component.
show partition configuration
Permitted
Permitted
Displays the partition configuration.
set partition home
Sets the Home SB.
show partition home
Permitted
Permitted
Displays the Home SB.
set partition memory_operation_mode
Permitted
Sets Memory operation mode.
show partition memory_operation_mode
Permitted
Permitted
Displays Memory operation mode.
set partition memory_mirror_ras_mode
Permitted
Sets Memory operation at mirror mod