Filter
Top Products
MMB CLI (Command Line Interface) Operations
Moreover, also when the values which are the same as the current values are set, power off/on is not
required and the above-mentioned message is not displayed.
Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
set partition memory_operation_mode <partition#> [performance |normal | partial_mirror | spare] {quiet}
(2) Option
quiet: Message is not displayed.
(3) Usage example
Example: When setting Memory Operation Mode of the Partition3 to performance
# set partition memory_operation_mode 3 performance
The setting will become effective the next time the partition power off/on is performed
#
here are cases when the partition is configured to 1SB, and, when Reserved SB is set, also when the
settings other than the Memory Operation Mode of DIMM configuration satisfying SB requirement is
registered as Reserved SB, a dialog box for conformation is displayed.
When the Memory Operation Mode is switched to the Reserved SB, a warning message indicating a
change in Memory Operation Mode is displayed in the dialog box and whether this setting is to be
continued is confirmed in the dialog box.
If this message is not displayed, the Memory Operation Mode is not changed even if it is switched to
Reserved SB.
Example: When setting the Mirror Mode of the Partition 1 to enable
(The SB with DIMM that does not satisfy the Mirror Mode requirements is registered as the Reserved SB in
Partition 1)
# set partition memory_operation_mode 1 pertial_mirror
The SB with DIMM that does not satisfy requirements of Mirror Mode is registered as the Reserved SB.
If you register this partition as a Mirror Mode,
Mirror Mode will be disabled when switching to a Reserved SB.
Are you sure to continue? [Y/N] y
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The setting will become effective the next time the partition power off/on is performed.
The SB with DIMM that does not satisfy requirements of Mirror Mode is registered as a Reserved SB. If
you register this partition as a Mirror Mode, Mirror Mode will be disabled when switching to Reserved SB.
Are you sure to continue? [Y/N]
The specified partition number is invalid.
The specified parameter is invalid.
Unable to register the specified Partition#%d as Mirror Mode enable because the CPU mismatch between
SBs.
Unable to register the specified Partition#%d as Mirror Mode enable because the DIMM does not satisfy
requirements of Mirror Mode.
Unable to register the specified Partition#%d as Mirror Mode enable because the unsupported CPU
configuration.
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal CPU
composition.
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal DIMM
composition.