Filter
Top Products
MMB Web-UI (Web User Interface) Operations
FIGURE 1.53 [ASR (Automatic Server Restart) Control] Window
TABLE 1.77 Display Items and Set Items of [ASR (Automatic Server Restart) Control] Window
Items
Description
ASR
Number of Restart Tries
Set the number of retries for restarting the operating system when there is time
out by Boot Watchdog, or Software Watchdog of SVAS, or the hardware error
occurs and OS shuts down.
The number of times can be set up to 0-10 times. When 0 is specified, it does not
retry.
Default is five times.
Action after exceeding
Restart tries
Repeat the restart by Watchdog Timeout and sets the action when the above-
mentioned retry number is exceeded. The actions are as below.
Stop rebooting and Power Off: Reboot process is stopped, power supply of
partition is cut off.
Stop rebooting: Reboot process is stopped, and the partition is stopped.
Diagnostic Interrupt assert: Reboot process is stopped, instructs the NMI
interruption for partition. Tries to collect the data for investigation (damp) for
the investigating the cause of stoppage, of the partition which has stopped.
Default setting is ‘Stop rebooting and Power Off’
Retry Counter
Displays the number of actual possible retries.
Boot Watchdog
Boot Watchdog
Enable/disable of the Boot Watchdog function of ServerView is set.
The start of OS is observed when setting it to Enable. After OS starts, Boot
Watchdog is stopped by ServerView.
Default is Disable.
Timeout time (seconds)
Time until Boot Watchdog does timeout is set.