Filter
Top Products
MMB CLI (Command Line Interface) Operations
Command
User
Outline
hotadd partition
Dynamic Partiiton HotAdd.
hotremove partition
Dynamic Reconfiguration HotRemove.
set partition dynamic_partitioning
Sets DR state of partition.
show partition dynamic_partitioning
Permitted
Displays DR state of partition.
TABLE 2.6 MMB CLI commands (CE)
Command
CE
Outline
Power control
power off
Turns the power off.
power on
Turns the power on.
Partition control
sadump
sadump instruction
reset
Hard Reset instruction
nmi
NMI interrupt instruction
Partition connection
console
Text Console connection to partition
Partition creation
add partition
Adds a partition component.
remove partition
Removes a partition component.
show partition configuration
Permitted
Displays the partition configuration.
set partition home
Sets the Home SB.
show partition home
Permitted
Displays the Home SB.
set partition memory_operation_mode
Sets Memory operation mode.
show partition memory_operation_mode
Permitted
Displays Memory operation mode.
set partition memory_mirror_ras_mode
Sets Memory operation at mirror mode.
show partition memory_mirror_ras_mode
Permitted
Displays Memory operation at mirror mode.
set partition pci_address_mode
Sets PCI bus number allocation mod.
show partition pci_address_mode
Permitted
Displays PCI bus number allocation mod.
set partition lan_device_mode
Sets LAN device mode.
show partition lan_device_mode
Permitted
Displays LAN device mode.
show partition mirror_mode
Permitted
Displays the Mirror mode setting.
set partition name
Sets the partition name.
show partition name
Permitted
Displays the partition name.
Time-related
set date
Sets the date and time.
show date
Permitted
Displays the date and time.
set timezone
Sets the time zone.
show timezone
Permitted
Displays the time zone.
Network-related
set ip
Sets the management LAN address.
set ipv6
Sets the IPv6 management LAN address.
show ip
Permitted
Displays the management LAN address.
show ipv6
Permitted
Displays the IPv6 management LAN address.
set hostname
Sets the MMB host name.
show hostname
Permitted
Displays the MMB host name.