Filter
Top Products
MMB CLI (Command Line Interface) Operations
set partition memory_mirror_ras_mode <partition#> [mirror_keep |capacity_keep ] {quiet}
(2) Option
quiet: Message is not displayed.
(3) Usage example
Example: When setting Memory Mirror RAS Mode of the Partition3 to Mirror Keep Mode
# set partition memory_mirror_ras_mode 3 mirror_keep
The setting will become effective the next time the partition power off/on is performed
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The setting will become effective the next time the partition power off/on is performed.
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute set partition command.
Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown.
Unable to execute this command because you have not authority to operate this partition.
2.2.28 set partition memory_opration_mode
It sets the Memory Operation Mode of the specified partition.
By default normal (Mirror Mode invalid) is set.
performance : sets the Performance Mode
normal : sets the Normal Mode
partial_mirror : sets the Partial Mirror Mode
full_mirror : sets the Full Mirror Mode
spare : sets the Spare Mode
For the partition which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
“Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown.”
When the partition is configured of or above 2SB, and when Reserved SB is set, also, when the settings
other than the Memory Operation Mode satisfying the DIMM configuration requirement of SB is set as
Reserved SB, following message is displayed and setting cannot be possible.
“The SB with DIMM that does not satisfy requirements of Mirror Mode is
registered as a Reserved SB.
If you register this partition as a Mirror Mode,
Mirror Mode will be disabled when switching to Reserved SB.
Are you sure to continue?[Y/N]”
For the partition which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.