Filter
Top Products
152 21555 Non-Transparent PCI-to-PCI Bridge User Manual
List of Registers
Table 64. Primary and Secondary Class Code Registers
These registers may be preloaded through the serial ROM. The Primary Class Code register may also be
programmed by the local processor before host configuration
.
Bit Name R/W Description
7:0 Prog IF (PIF)
PPIF: R/(WS)
SPIF: R
Reads as zero.
15:8 Sub
-Class Code (SCC)
PSCC: R/(WS)
SSCC: R
Reads as 80 hex to indicate that this bridge device is
classified as “other”.
23:16 Base Class Code (BCC)
PBCC:R/(WS)
SBCC: R
Reads as 06 hex to indicate device is a bridge device.
Table 65. Primary and Secondary Cache Line Size Registers
Bit Name R/W Description
7:0 Cache Line Size R/W
Designates the cache line size for the corresponding interface in units
of 32
-bit Dwords. Used for prefetching memory reads and for
terminating MWIs. Valid cache line sizes are 8, 16, and 32 Dwords.
When the cache line size is set to any other value, the 21555 uses the
same behavior as when the cache line size is set to 8.
Reset value is 00h.
Offsets Primary Class Code Secondary Class Code
Primary byte 0B:09h 4B:49h
Secondary byte 4B:49h 0B:09h
Offsets Primary Cache Line Size Secondary Cache Line Size
Primary byte 0Ch 4Ch
Secondary byte 4Ch 0Ch