5-27
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 5 Installing the IPS 4270-20
Installing the Rail System Kit
To extend the IPS 4270-20 from the rack, follow these steps:
Step 1
Pull the quick-release levers on each side of the front bezel of the IPS 4270-20 to release it from the rack
and extend it on the rack rails until the rail-release latches engage.
Note
The release latches lock in to place when the rails are fully extended.
Step 2
After performing the installation or maintenance procedure, slide the IPS 4270-20 in to the rack by
pressing the rail-release latches.
1
2
3
45678
Cisco
IPS
42
70 SERIES
Intrus
ion P
rev
ention Sensor
UID
SYSTEM
PWR STATU
S
M
G
M
T
0
M
G
M
T 1
250222