Filter
Top Products
4-10
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 4 Installing the IPS 4260
Accessories
Accessories
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
The IPS 4260 accessories kit contains the following:
•
DB25 connector
•
DB9 connector
•
Rack mounting kit—screws, washers, and metal bracket
•
RJ45 console cable
•
Two 6-ft Ethernet cables
Rack Mounting
You can rack mount the IPS 4260 in a 2- or 4-post rack. This section describes how to rack mount the
IPS 4260 and contains the following topics:
•
Installing the IPS 4260 in a 4-Post Rack, page 4-11
•
Installing the IPS 4260 in a 2-Post Rack, page 4-14
Shock Operating Half-sine 2 G, 11 ms pulse, 100 pulses
Nonoperating 25 G, 170 inches/sec delta V
Vibration 2.2 Grms, 10 minutes per axis on all three axes
Table 4-4 IPS 4260 Specifications (continued)