Filter
Top Products
E-10
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Appendix E Troubleshooting
Recovering the Password
Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
ips 503d.e59c.7c4c to 503d.e59c.7c4c N/A N/A 7.1(4)E4
Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------
ips IPS Up 7.1(4)E4
Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
ips Up Up
Mod License Name License Status Time Remaining
--- -------------- --------------- ---------------
ips IPS Module Enabled 210 days
Step 4
Session to the ASA 5500-X IPS SSP.
asa# session ips
Opening command session with module ips.
Connected to module ips. Escape character sequence is 'CTRL-^X'.
Step 5
Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 6
Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local
country laws governing import, export, transfer and use. Delivery of Cisco cryptographic
products does not imply third-party authority to import, export, distribute or use
encryption. Importers, exporters, distributors and users are responsible for compliance
with U.S. and local country laws. By using this product you agree to comply with
applicable laws and regulations. If you are unable to comply with U.S. and local laws,
return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to export@cisco.com.
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to
operate with the currently installed signature set. A valid license must be obtained in
order to apply signature updates. Please go to http://www.cisco.com/go/license to obtain a
new license or install a license.
asa-ssp#