Filter
Top Products
3-6
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 3 Installing the IPS 4240 and IPS 4255
Rack Mounting
The IPS 4240 and IPS 4255 accessories kit contains the following:
•
DB25 connector
•
DB9 connector
•
Rack mounting kit—screws, washers, and metal bracket
•
RJ45 console cable
•
Two 6-ft Ethernet cables
Rack Mounting
To rack mount the IPS 4240 and IPS 4255, follow these steps:
Step 1
Attach the bracket to the appliance using the supplied screws. You can attach the brackets to the holes
near the front of the appliance.
Note
The top hole on the left bracket is a banana jack you can use for ESD grounding purposes when
you are servicing the system. You can use the two threaded holes to mount a ground lug to
ground the chassis.
114016
Cisco IPS 4240
series
Intrusion Prevention Sensor