Filter
Top Products
3-13
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 3 Installing the IPS 4240 and IPS 4255
Installing the IPS 4240-DC
For More Information
•
DC power guidelines are listed in Regulatory Compliance and Safety Information for the Cisco
Intrusion Prevention System 4200 Series Appliance Sensor.
•
For more information on working with electrical power and in an ESD environment, see Safety
Recommendations, page 2-2.
•
For the procedure for placing the appliance in a rack, see Rack Mounting, page 3-6.
•
For the procedure for using the setup command to initialize the appliance, see Appendix B,
“Initializing the Sensor.”
•
For the procedure for updating the appliance with the most recent cisco IPS software, see Obtaining
Cisco IPS Software, page C-1.
•
For the procedure for using HTTPS to log in to IDM, refer to Logging In to IDM.
•
For the procedures for configuring intrusion prevention on your sensor, refer to the following guides:
–
Cisco Intrusion Prevention System Device Manager Configuration Guide for IPS 7.1
–
Cisco Intrusion Prevention System Manager Express Configuration Guide for IPS 7.1
•
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.1