Filter
Top Products
Page 14 Epson Research and Development
Vancouver Design Center
S1D13705 13705CFG Configuration Program
X27A-B-001-03 Issue Date: 02/03/11
Panel Dimensions These fields specify the panel width and height. A
number of common widths and height are available in
the selection boxes. If the width/height of your panel is
not listed, enter the actual panel dimensions into the edit
field.
Manually entered pixel widths must be multiples of 8.
If a value is entered that does not match these require-
ments, a notification box appears and 13705CFG
rounds up the value to the next allowable width.
Non-Display Periods It is recommended that these automatically generated
non-display values be used without adjustment.
However, manual adjustment may be useful in fine
tuning the non-display width and non-display height.
Timings These settings show the Frame Rate and Pixel Clock
timings.
Frame Rate This field displays the effective frame rate of the LCD
panel. Panel dimensions are fixed therefore frame rate
can only be adjusted by changing either PCLK or non-
display period values. Higher frame rates correspond to
smaller horizontal and vertical non-display values, or
higher PCLK frequencies.
Pixel Clock The pixel clock used for the LCD panel is displayed in
this field. The pixel clock is dependent on the CLKI
frequency.
TFT/FPLINE
Start Pos Specifies the delay (in pixels) from the start of the
horizontal non-display period to the leading edge of the
FPLINE pulse. This setting is only available when the
selected panel type is TFT.
Refer to S1D13705 Hardware Functional Specifi-
cation, document number X27A-A-001-xx for a
complete description of the FPLINE pulse settings.