Filter
Top Products
Page 8 Epson Research and Development
Vancouver Design Center
S1D13705 Windows® CE 2.x Display Drivers
X27A-E-001-03 Issue Date: 01/06/07
ddi.dll $(_FLATRELEASEDIR)\ddi_s364.dll NK SH
ENDIF
ENDIF
ENDIF
ENDIF Insert this line
9. The file MODE0.H (located in x:\wince\platform\cepc\drivers\display\S1D13705)
contains the register values required to set the screen resolution, color depth (bpp),
display type, active display (LCD/CRT/TV), display rotation, etc.
Before building the display driver, refer to the descriptions in the file MODE0.H for
the default settings of the driver. If the default does not match the configuration you
are building for then MODE0.H will have to be regenerated with the correct informa-
tion.
Use the program 13705CFG to generate the header file. For information on how to use
13705CFG, refer to the 13705CFG Configuration Program User Manual, document
number X27A-B-001-xx, available at www.erd.epson.com
After selecting the desired configuration, export the file as a “C Header File for
S1D13705 WinCE Drivers”. Save the new configuration as MODE0.H in
x:\wince\platform\cepc\drivers\display\S1D13705, replacing the original configura-
tion file.
10. Edit the file PLATFORM.REG to match the screen resolution, color depth (bpp), ac-
tive display (LCD/CRT/TV) and rotation information in MODE.H. PLAT-
FORM.REG is located in x:\wince\platform\cepc\files.
For example, the display driver section of PLATFORM.REG should be as follows
when using a 320x240 LCD panel with a color depth of 8 bpp in SwivelView 0°
(landscape) mode:
; Default for EPSON Display Driver
; 320x240 at 8 bits/pixel, LCD display, no rotation
; Useful Hex Values
; 1024=0x400, 768=0x300 640=0x280 480=0x1E0 320=140 240=0xF0
[HKEY_LOCAL_MACHINE\Drivers\Display\S1D13705]
"Width"=dword:140
"Height"=dword:F0
"Bpp"=dword:8
“ActiveDisp”=dword:1
“Rotation”=dword:0
11. Delete all the files in \wince\release directory and delete x:\wince\platform\cepc\*.bif