Filter
Top Products
Epson Research and Development Page 17
Vancouver Design Center
13705CFG Configuration Program S1D13705
Issue Date: 02/03/11 X27A-B-001-03
Power Up Time Delay This setting controls the time delay between when the
S1D13705 control signals are turned on and the LCD
panel is powered-on. This setting must be configured
according to the specification for the panel being used.
This value is only used by Epson evaluation software
designed for the S5U13705B00C evaluation board.
Registers Tab
The Registers tab allows viewing and direct editing the S1D13705 register values.
Scroll up and down the list of registers and view their configured values based on the
settings in the previous tabs. Individual register settings may be changed by double-
clicking on the register in the listing. Manual changes to the registers are not checked
for errors, so caution is warranted when directly editing these values. It is strongly
recommended that the S1D13705 Hardware Functional Specification, document number
X27A-A-001-xx be referred to before making a manual register settings.
Manually entered values may be changed by 13705CFG if further configuration changes
are made on the other tabs. In this case, the user is notified.