Filter
Top Products
Epson Research and Development Page 3
Vancouver Design Center
13705BMP Demonstration Program S1D13705
Issue Date: 01/02/12 X27A-B-006-03
13705BMP
13705BMP is a demonstration program for the S1D13705 which can read and display
.BMP format (Windows bitmap) files.
The 13705BMP display utility is designed to operate on an x86 based personal computer.
There are both 16-bit and 32-bit versions of 13705BMP. The 16-bit version is for use under
DOS when the S1D13705 evaluation board has been configured for D0000. The 32-bit
version is intended for use under Win32. Before use 13705BMP must be configured for the
display system. Consult documentation for the program 13705CFG.EXE which can be
used to configure 13705BMP.
13705BMP is not supported on non-PC platforms.
Installation
For 16-Bit Program Version: copy the file 13705BMP.EXE to a directory that is in the
DOS path on your hard drive.
For 32-Bit Program Version: install the 32-bit Windows device driver S1D13X0X.VXD
as described in the S1D13X0X 32-Bit Windows Device Driver Installation Guide,
document number X00A-E-003-xx. Copy the file 13705BMP.EXE to a directory that is in
the DOS path on your hard drive.
Usage
At the prompt, type:
13705bmp bmp_file [/a[time]] [/l] [/p] [/noinit] [/?].
Where: bmp_file the name of the file to display
/a[time] automatic mode returns to the operating system after “time” seconds. If time
is not specified the default is 5 seconds. This option is intended for use with
batch files to automate displaying a series of images.
/l override default configuration settings and set landscape display mode.
/p override default configuration settings and set portrait display mode.
/noinit bypass the register initialization and use the current setup
use this option to override changes that take place to the timing registers
/? displays the Help screen
Comments
• 13705BMP currently views only Windows BMP format images.