Fujitsu FI-6800 Scanner User Manual


 
Index
Introduction
Chapter 8 Troubleshooting
Appendix
Glossary
Contents
TOP
147
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Operational
Settings
Replacing
Consumables
Scanner
Overview
Troubleshooting
J0:52 Paper jam
Remove the document and try
again.
1 Remove the jammed
document(s). For
information on how to
remove documents, refer
to "8.1 Paper Jam" (page
143).
2 Check if the documents
are suitable for scanning
by ADF.
For more details, refer to
"2.2 Documents for
Scanning" (page 40).
3 Clean the rollers.
For more details, refer to
"Chapter 6 Daily Care"
(page 121).
J3:54 Skew detected
Remove the document and try
again.
1 Remove the jammed
document(s). For
information on how to
remove documents, refer
to "8.1 Paper Jam" (page
143).
2 Make sure that the hopper
side guides are not set
too wide.
Error
code
Error message Countermeasure
J2:55 Multifeed detected (Overlap)
Press the iMFF button to eject
the document and to suppress
multifeed detection from next
scans. Press the Eject button
just to eject the document.
When [Ready] is displayed,
increase the paper separation
force by using the [] button
to suppress multifeeds. (*1)
When you press the [Eject]
button on the operator
panel, the multifed
documents are ejected.
Multifeed detected (Overlap)
Press the Eject button to eject
the document.
When [Ready] is displayed,
increase the paper separation
force by using the [] button
to suppress multifeeds. (*1)
Error
code
Error message Countermeasure