Fujitsu FI-6800 Scanner User Manual


 
Index
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Contents
TOP
109
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Various Ways
to Scan
Configuring
the Scan
Settings
How to Use
the Operator
Panel
4 Select [Multi Image Output] for [Output mode].
5 In [Order (for Multi Image Output)], select the order to
output multi-images.
z Primary: Color/Grayscale
Secondary: Binary
First, a color or grayscale image is output, and then a black &
white image.
z Primary: Binary
Secondary: Color/Grayscale
First, a black & white image is output, and then a color or
grayscale image.
6 Under [Select Current Image Setting], select a side (if in
Duplex Scan mode).
In the [TWAIN Driver (32)] dialog box, click the [OK] button.
7 Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
The settings are saved.
8 Perform a scan from ScandAll PRO.
For information on how to perform scanning, refer to "ScandAll PRO
V2.0 User's Guide".
You can use a batch profile to change settings such as the
folders to save respective scanned color/grayscale and
black & white images, and their file formats and names.
The procedure is as follows:
1 In the [Profile Editor] dialog box, select the [File
format and Name scheme] tab, and then select the
[Sort color and monochrome automatically] check
box.
2 Specify the respective folder names to save, the file
formats, and the file names for the color/grayscale
and black & white images.
3 Click the [OK] button.
The settings are saved.
4 Perform a batch scan.
For information on how to perform batch scanning,
refer to "ScandAll PRO V2.0 User's Guide".