Fujitsu FI-6800 Scanner User Manual


 
Index
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Contents
TOP
190
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Replacing
Consumables
Scanner
Overview
Operational
Settings
3 Adjust the offset/vertical magnification as necessary.
Offset Setting Description
Unit Select [ADF (front)] or [ADF (back)] as the target
for offset adjustment.
Note that when the connection is via SCSI or
USB Connector 2, you can only adjust the offset
for [ADF (back)].
Main Adjusts the horizontal (width) offset.
The setting range is from -2 to 3 mm in 0.5 mm
increments.
Sub Adjusts the vertical (length) offset.
The setting range is from -2 to 3 mm in 0.5 mm
increments.
Vertical magnification
Adjustment
Description
Unit The target for vertical
magnification adjustment is fixed
at [ADF].
Vertical magnification
Adjustment (length)
Adjusts the vertical (length)
magnification.
The setting range is from -3.1 to
3.1% in 0.1% increments.