Filter
Top Products
Index
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Contents
TOP
91
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Various Ways
to Scan
Configuring
the Scan
Settings
How to Use
the Operator
Panel
The value on the right side of the slide bar indicates the ratio of
image noise (*1), and is recognized as blank when the scanned
image contains a smaller value.
The value ranges from 0.2 to 3.0% (in increments of 0.2) or
OFF (--).
*1: The ratio of black dots to the scan area (for white papers).
z Color/Grayscale mode
Specify a sensitivity level from 1 to 5 for skipping blank (white)
pages. The larger the value is set, the more likely for the pages
to be detected as blank.
6 Click the [OK] button.
It returns to the [TWAIN Driver (32)] dialog box.
7 Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
The settings are saved.
8 Perform a scan from ScandAll PRO.
For information on how to perform scanning, refer to "ScandAll PRO
V2.0 User's Guide".