Fujitsu FI-6800 Scanner User Manual


 
Index
Introduction
Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Contents
TOP
77
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Configuring
the Scan
Settings
13: Button Sound
Vol
Specify whether or not to make a sound when a button on the
operator panel is pressed.
1: OFF
2: Low
3: High
(ring time fixed at 0.01 second)
1: OFF
14: Contrast Specify the contrast for the LCD on the operator panel. Weak Strong






15: Backlight ON Specify the duration for which the backlight is lit ON.
Until initialization is complete after turning the power on, this item
operates in [ON] regardless of the setting configured.
OFF, ON, 5, 10, 20, 30, 40, 50, 60, 90, 120,
150, 180, 210, 240, 270, 300 (seconds)
ON
16: LED Blink
Cycle
Specify the interval in which the Check LED flashes when
(for Information) is displayed on the LCD.
0.5, 1.0, 1.5, 2.0, 2.5 (seconds) 2.0
17: Horizontal
Scroll Speed
Specify the speed in which the display is horizontally scrolled.
The displayed item is scrolled horizontally when the text does not
fit in the LCD.
1: Fast
2: Normal
3: Slow
4: OFF
2: Normal
18: Operation
Panel Timeout
Specify the time to return to the [Ready] screen from [Hopper
Level] or [Paper Separation Force].
Note that this option is only available when you display [Hopper
Level] or [Paper Separation Force] from the [Ready] screen by
using a shortcut key.
To display [Hopper Level] by shortcut key, press the [Eject] button
and either the [
] or [] button at the same time when [Ready] is
displayed.
Note that the [Hopper Level] screen is not displayed unless the
two buttons are pressed simultaneously.
To display the [Paper Separation Force] screen by shortcut key,
press the [
] or [] button in the [Ready] screen.
OFF, 5 to 9 (seconds) 7
Item Description Setting/Value Factory Default
- : No settings/values