Fujitsu FI-6800 Scanner User Manual


 
Index
Appendix
Appendix
Glossary
Introduction
Contents
224
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
TOP
*1: Long Page Scanning supports scanning of documents with a length up to 3048 mm (120 in.) in feeding direction.
For documents longer than 864 mm (34.02 in.), the resolution must be set to 300 dpi or less.
*2: The maximum hardware limitation. Software processing time such as data transfer time is added to the actual scanning time.
*3: The maximum capacity varies depending on the paper weight. See "2.2 Documents for Scanning" (page 40).
*4: SCSI and USB 2.0/1.1 interfaces cannot be used at the same time.
*5: You cannot connect multiple computers to the scanner using each type of interface cables at the same time.
*6: Connection via USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when using USB 1.1.
Halftone pattern Dither/error diffusion -
Interface (*4)(*5) Ultra SCSI Shielded 50-pin high-density type
USB 2.0 / 1.1 (*6) B Type
Kofax VRS Ultra Wide SCSI Shielded 68-pin high-density type
USB 2.0 / 1.1 (*6) B Type
Liquid Crystal Display Display: FSTN (black & white)
Displayed dots: 110 × 65
Displayed lines: 16 × 5 (row x column)
-
Other function Hardware real-time JPEG compression Grayscale/color
Item Specification Notes