Fujitsu FI-6800 Scanner User Manual


 
Index
Introduction
Chapter 8 Troubleshooting
Appendix
Glossary
Contents
TOP
153
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Operational
Settings
Replacing
Consumables
Scanner
Overview
Troubleshooting
Scanner Option Error (only when imprinter is
installed)
Error codes beginning with the letter "A" are displayed.
Sensor Error
Error codes beginning with the letter "L" are displayed.
Error
code
Error message Countermeasure
A0:B2 Imprinter error (RAM)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
1 Check if the Print Cartridge is
installed correctly. For more
details, refer to the "fi-680PRF/
PRB Imprinter Operator's
Guide".
2 Turn the power off then back on.
If this method does not solve the
problem, write down the
displayed error code and contact
your FUJISU scanner dealer or
an authorized FUJITSU scanner
service provider.
A1:B3 Imprinter error
(communication
timeout)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
A2:B5 Imprinter error (back-
side print head)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
A3:B6 Imprinter error
(EEPROM)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
A4:B8 Imprinter error (ROM)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
1 Check if the print cartridge is
installed correctly. For more
details, refer to the “fi-680PRF/
PRB Imprinter Operator's
Guide”.
2 Turn the power off then back on.
If this method does not solve the
problem, write down the
displayed error code and contact
your FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider.
A2:BB Imprinter error (front-
side print head)
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
Error
code
Error message Countermeasure
L0:11
L1:12
L2:13
L3:14
L4:15
L5:17
L6:1B
L7:1C
Sensor error
If the problem persists
after turning the power
back on, please inform
your service engineer
of the above error
code.
Turn the power off then back on.
If this method does not solve the
problem, write down the displayed
error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
Error
code
Error message Countermeasure