Fujitsu FI-6800 Scanner User Manual


 
Index
Appendix
Chapter 3 Configuring the Scan Settings
Glossary
Introduction
Contents
TOP
50
How to Load
Documents
Configuring
the Scan
Settings
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
How to Use
the Operator
Panel
[Resolution]
Specify the resolution for scanning.
You can either select a predefined value from the list, or
specify a custom resolution (from 50 to 600 dpi, in increments
of 1 dpi).
By selecting the [Predefine] check box, you can also easily
perform scanning by selecting a predefined resolution from
[Best], [Better], and [Normal].
Values in [Predefine] can be changed by clicking the [...]
button.
[Scan Type]
Specify the side(s) to scan.
Scanning side(s) can be specified as follows:
z ADF Front Side
z ADF Duplex
z Long Page (Front side)
z Long Page (Duplex)
z ADF Back Side
[Paper Size]
Select a paper size from the displayed list.
Up to three custom sizes can be added to the list by using the
[...] button.
You can also change the order in which the items (sizes) are
listed.
[Image Mode]
Specify the output image type for the scanned images.
[Scan] Button
Click this button to start scanning by the current settings.
Mode Description
Black&White Scanned in binary (black & white) mode.
Halftone Scanned through halftone processing in binary
(black & white) mode.
Grayscale Scanned in gradations from black to white.
Select either [Grayscale] (256) or [4bit
Grayscale] (4-bit or 16 grayscale).
SEE (Selectable
Edge
Enhancement)
Line drawings and photographs are scanned
using halftone processing, emphasizing the lines
and text on the document.
This mode is most suitable when you want to
emphasize only the text in a document that
contains both text and photographs.
Color Scanned in color mode. Select a color mode
from [24 Color] (24-bit color), [256 Color] (256
colors), and [8 Color] (8 colors).