Fujitsu FI-6800 Scanner User Manual


 
Index
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Contents
TOP
27
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Power saving mode saves the power consumption of the
scanner while the power is turned on.
If the scanner is left powered on for 15 minutes or more
without being used, it automatically enters power saving
mode.
When it enters power saving mode, the LCD on the operator
panel turns off. The power button remains lit in blue.
To resume from power saving mode, perform one of the
following:
z Load a document on the hopper.
z Press any button (except for power button) on the operator panel.
Note that the scanner will be turned off when you press the power
button for more than two seconds.
z Execute a command from the scanner driver.
1.10 Resuming from Power Saving Mode
The waiting time for entering power saving mode can be
changed in the Software Operation Panel.
For more details, refer to "Setting the Waiting Time to Enter
Power Saving Mode [Power saving]" (page 218).