Filter
Top Products
Index
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Contents
TOP
127
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Troubleshooting
Replacing
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Brake Roller (1 unit)
Gently wipe the rollers so that the roller surface does not get damaged.
Wipe along the grooves of the roller surface. Remove the roller for easier
cleaning. For information on how to remove the brake roller, refer to "7.4
Replacing the Brake Roller" (page 140).
Feed Roller
Gently wipe the rollers so that the roller surface does not get damaged.
Clean the whole surface as you rotate the roller manually. Make sure to
clean thoroughly because the feeding performance is affected especially
when there is black foreign matter on the roller.
z Inside the top cover (rollers: 2 locations × 2 units)
z Paper path lower-side (rollers: 5 locations × 2 units)
Assist Roller (rollers: 1 location × 2 units)
Gently wipe the rollers so that the roller surface does not get damaged.
Clean the whole surface as you rotate the roller manually. Make sure to
clean thoroughly because the feeding performance is affected especially
when there is black foreign matter on the roller.
Assist roller is located on the paper path lower-side.
Feed Roller
Feed Roller
Assist Roller