Fujitsu FI-6800 Scanner User Manual


 
Index
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Contents
TOP
180
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Replacing
Consumables
Scanner
Overview
Operational
Settings
Retain current
paper thickness
Specify whether or not to keep the
operator panel’s paper separation
force setting upon turning the power
off.
Remember / Do not remember Do not remember
33
Cleaning Cycle Specify the cycle for cleaning the
scanner.
Also specify whether or not to show
a message for cleaning from the
scanner driver.
1,000 to 255,000 sheets
(in increments of 1,000)
[Show cleaning instructions.] check box
10,000 sheets
Not selected
33
Life Counter Alarm
Setting
Specify the replacement cycles for
the consumables.
Each consumable
10,000 to 2,550,000 sheets
(in increments of 10,000)
600,000 sheets
33
Set the interval for
feeding sheets
If the bottom of the scanned image
is partially missing due to a large
skew when scanning in Automatic
Page Size Detection, specify a
longer interval to feed the
documents.
Specifying a longer interval leaves
more time between each document
to be scanned.
Short (default) - Long
(1 to 4 levels)
Short (default)
33
Pick Speed When multifeeds or paper jams
occur frequently, the symptom may
be improved by slowing down the
speed (pick speed) in which the
documents are fed.
It can also be configured from the
operator panel.
Normal / Slower Normal
33
Item Description Setting/Value Factory Default SCSI or USB
Connector 1
SCSI or USB
Connector 2
3: Configurable
-: Not configurable