Filter
Top Products
Index
Introduction
Chapter 8 Troubleshooting
Appendix
Glossary
Contents
TOP
149
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Operational
Settings
Replacing
Consumables
Scanner
Overview
Troubleshooting
■ Cover Open and Print Errors
Error codes beginning with the letter "U" are displayed.
*1: When you open the ADF or top cover while the scanner is ready, only
an error message will appear without an error code. Also, note that
buttons on the operator panel are disabled while the ADF or top cover
is open.
Device Errors
The following are lists of device errors which require
troubleshooting by a service engineer.
■ Internal Error, Optical Error
Error codes beginning with the letter "E" are displayed.
Error
code
Error message Countermeasure
U4:40
(*1)
ADF open Close the ADF or the top cover, and
reload the documents.
U4:41
(*1)
Top cover open
U6:B4 Print cartridge not
installed (back-side
imprinter)
Check if the Print
Cartridge is mounted
correctly.
This error is related to the imprinter
(sold separately). Install the print
cartridge.
For more details, refer to "fi-680PRF/
PRB Imprinter Operator's Guide".
U6:BA Print cartridge not
installed (front-side
imprinter)
Check if the Print
Cartridge is mounted
correctly.
Error
code
Error message Countermeasure
E8:8E SCSI error
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
Turn the power off then back on.
If this method does not solve the
problem, write down the displayed
error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
E7:D2 EEPROM error
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
E6:D3 Operator Panel error
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.
E5:EB Flash error
If the problem persists
after turning the power
back on, please inform
your service engineer of
the above error code.