Filter
Top Products
Rear Door Removal
1 Remove the PC tray (Tray 2).
2 Open the Rear Door. Support the door with one hand.
3 Release the door support from the rear of the printer frame as
follows: (see Figure 6-6)
a Using needle-nose pliers, squeeze the tabs on the end of the
retaining strap. Slide the strap up and out of the printer
frame.
b
Release the retaining strap tab from the slot in the printer
frame.
c Lift the tab to free it from the slot.
(continued on next page)
Figure 6-6 Releasing the Door Support
6-8 Removal and Replacement