Filter
Top Products
5 Under the Extras menu, select Set Printer Password. On
the Printer Security screen, enter the new password (numeric
values can be set from 0 to 65535), and click on the OK button.
HP JetAdmin Utility (Novell Networks)
1 Run JETADMIN.
2 Select the printer you want to configure. It is listed under its
“JetDirect Interface Name” which appears on the self test
page/configuration plot.
3 Select Configuration.... The Printer I/O Configuration
screen appears.
4 Select Advance.... The Advance Settings screen appears.
5 Select Lock Printer Control Panel....
6 Click on Select... (the Advanced: Printer Security screen
appears), then click on the ON button.
7 Click the OK button.
ASCII PJL Escape Sequence
Password: send this sequence to the printer from any ASCII
editor:
E
C
%-12345X@PJL JOB
@PJL DEFAULT PASSWORD=[numeric password
(0 to 65535)]
@PJL EOJ
E
C
%-12345X
CPLOCK: to turn on or off, assuming that a password has NOT
been set, send the following ASCII sequence to the printer:
E
C
%-12345X@PJL JOB
@PJL DEFAULT CPLOCK=ON [OFF]
@PJL EOJ
E
C
%-12345X
If a password HAS been set, send the following ASCII sequence
to the printer to turn CPLOCK on or off.:
E
C
%-12345X@PJL JOB PASSWORD=(numeric password)
@PJL DEFAULT CPLOCK=ON(OFF)
@PJL EOJ
E
C
%-12345X
Configuration 3-19