Filter
Top Products
Changing the Control Panel Display
Language
The default control panel display language is set for English.
Supported languages are: English, French, German, Italian,
Spanish, Finnish, Danish, Dutch, Swedish, Norwegian, and
Portuguese. Follow these instructions to change the display
language.
1 Switch OFF the printer.
2
Press and hold [Enter] (or Select on the LJ 5) while switching
the printer ON until CONFIG LANGUAGE appears in the display.
3 After the power-on self test, LANGUAGE=ENGLISH appears. Press
[+] until the desired language appears in the display.
4 Press [Enter] to save your choice. An asterisk (*)appears next
to the language to indicate it is now the default.
5 Press [On Line]. The On Line indicator is lit, and display
messages are now in the language you selected.
Note
If the display language is changed, replace or
install the Control Panel Overlay to match the
selected language. See the index to Chapter 6 for
instructions on changing or installing the Control
Panel Overlay.
Note
Failure to explicitly select a language after
powering on the printer while holding down the
ENTER or SELECT key will cause the printer to
prompt for a specific language every time it is
powered on.
3-28 Configuration